Douglasville Gravel & Sand Delivery

What Area Will 1 Ton of Gravel Cover?

A ton of gravel will cover an area of approximately 80 to 100 square feet when spread 2 inches deep. This is equivalent to 1/5 to 1/4 of an acre. Gravel is often used in landscaping and for driveways, walkways, and paths. It is also commonly used as a base for pavers and sheds. The size of the gravel particles will determine how well it packs and how fast it drains. Coarser gravel drains more slowly than finer gravel, so it is often used in areas that are subject to flooding or where water needs to be drained slowly, such as French drains. Fine gravel packs tightly and drains quickly, making it ideal for use on driveways and in other high-traffic areas where good drainage is essential. For best results, choose a gravel that is similar in color and texture to the surrounding soil so it will blend in naturally.

Is Sand or Gravel Cheaper?

The cost of sand and gravel varies depending on a number of factors, including the type of material, the size and quantity of the order, and the distance from the supplier. In general, sand is cheaper than gravel, but the price difference depends on the specific type of sand and gravel being purchased. For example, construction-grade sand is typically less expensive than beach sand, while specialty gravels like white marble chips can be quite costly. In terms of quantity, it is usually more expensive to buy sand and gravel in smaller quantities, such as by the bag or shovelful. And finally, distance is a factor because local suppliers will typically charge less for delivery than suppliers located further away. When all factors are considered, sand is usually the more economical choice for most applications.

How Many Yards of Sand or Gravel Are In a Ton?

A ton is a unit of weight equal to 2,000 pounds. When it comes to sand or gravel, a ton is usually considered to be approximately 2 cubic yards. This means that a truckload of sand or gravel will typically contain around 8 to 10 tons of material. In terms of volume, a ton of sand or gravel would be equivalent to approximately 9 to 12 cubic feet. Of course, the exact amount will vary depending on the type and density of the material in question. For example, a ton of quicksand is likely to weigh less than a ton of granite. Ultimately, the best way to determine the precise weight or volume of a given amount of sand or gravel is to consult with a local supplier.